Huawei SUN2000-8KTL Quick Guide

2
3. Remove the DC connectors and use a cable cutter to cut off the terminals of DC input power
cables. Set the cables aside for future use.
Cable
cutter
Cable
cutter
The DC terminals of SUN2000-(8KTL–12KTL) must be cut off. If the DC connectors of SUN2000-
(8KTL–12KTL) are directly connected to SUN2000-(8KTL–12KTL)-M2, the SUN2000 may be
burnt.
4. Remove the RS485 communications cable and use a cable cutter to cut off the RJ45
connector. Set the cable aside for future use.
5. Remove the PE cable and remove the crimped OT terminal. Set the cable aside for future use.

Huawei SUN2000-8KTL Specifications

General

Max. efficiency	98.6%
European efficiency	98.3%
Max. DC voltage	1100 V
Nominal AC output power	8000 W
Weight	25 kg
Operating temperature range	-25°C to +60°C
Protection rating	IP65
Max. apparent AC power	8800 VA
AC grid frequency	50 Hz / 60 Hz
Starting voltage	200 V
Number of MPPTs	2
Cooling	Natural convection
Maximum DC Input Power	12000 W
Output Frequency	50 Hz / 60 Hz
Nominal AC voltage	230 V
Operating voltage range	200 V - 1000 V
Rated Output Voltage	230 V
MPPT Voltage Range	260 V - 850 V