Huawei TaiShan 200 23280 - Page 100

Figure 5-53 Security screen
Step 3 Select Set Supervisor Password, press Enter, enter the original password, and set
or modify the administrator password for login.
NO TE
● The administrator password must be a string of 8 to 16 characters, and contain at least
three types of the following characters: special characters including spaces (mandatory),
uppercase letters, lowercase letters, and digits.
● The new password cannot be the same as 3 to 6 previously used passwords.
● The default BIOS password is Admin@9000. If the BIOS version supports the
rst-login
password function, the BIOS does not have a password by default, and the system
prompts you to set a new password when you access the Setup screen for the rst time.
Step 4 (Optional) After the setting is successful, click Clear Supervisor Password. Before
clearing the password, enter the current password.
NO TE
The Clear Supervisor Password parameter is not supported if the BIOS version supports
the rst-login password function (The BIOS does not have a password by default, and the
system prompts you to set a new password when you access the Setup screen for the rst
time).
Step 5 Press F10.
The system displays the "Save conguration changes and exit?" dialog box.
Step 6 Select Yes and press Enter.
The server automatically restarts for the settings to take
eect.
----End
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 92