Step 5 On the login page, enter the user name and password for logging in to the iBMC
WebUI.
The default user name of the iBMC is Administrator, and the default password is
Admin@9000.
The user account will be locked after ve consecutive login failures with wrong passwords.
If your user account is locked, log in again 5 minutes later.
Step 6 Select This iBMC from the Domain drop-down list.
Step 7 Click Log In.
----End
5.12.5 Checking the Server
Check the server in the sequence shown in Figure 5-60. The method to be used
depends on the actual situation.
For details about CLI commands, see
TaiShan Rack Server iBMC User Guide
.
Figure 5-60 Checking the server
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 99
To Next Page
Loading...
