Procedure
Step 1 Check indicator status.
Ensure that hardware devices are working correctly.
For details, see 2.2 Front Panel Indicators and Buttons and 2.4 Rear Panel
Indicators.
Step 2 Check the server.
● Check the server using the iBMC WebUI.
a. Log in to the iBMC over the WebUI. For details, see 5.12.4 Logging In to
the iBMC WebUI.
You are advised to change the initial password when logging in to the iBMC for
the rst time. For details, see 5.12.6 Changing Initial Passwords.
b. Choose iBMC Settings on the menu bar, and select Firmware Upgrade
in the navigation tree.
The page shown in Figure 5-61 is displayed.
Check that the server version meets site requirements.
Figure 5-61 Querying version information (WebUI)
c. Check the server status on the upper right corner of the iBMC WebUI, as
shown in Figure 5-62.
Figure 5-62 Querying server health status (WebUI)
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 100
To Next Page
Loading...
