Sensor Description Component
CPU
N
Memory DIMM status DIMMs of CPU
N
.
N
indicates
the DIMM number. The value
ranges from 1 to 2.
PS
N
Fan Status PSU fan status PSU.
N
indicates the PSU
number. The value is 1 or 2.
PS
N
Temp Status PSU presence
PS
N
Status PSU status
Power Button Power button status Right mounting ear
UID Button UID button status
DISK
N
Drive status Drive.
N
indicates the physical
drive slot number.
FAN
N
Presence Fan presence Fan module.
N
indicates the
fan module number. The
value ranges from 1 to 4.
FAN
N
Status Fan status
RTC Battery RTC battery status. An
alarm is generated when
the voltage is lower than
1 V.
CMOS battery
DIMM
N
DIMM status DIMM.
N
indicates the DIMM
slot number.
PS
N
Inlet Temp PSU air inlet
temperature
PSU.
N
indicates the PSU
number. The value is 1 or 2.
PS
N
Redundancy Redundancy failure due
to PSU removal
BMC Boot Up BMC startup events N/A
N
indicates the number of the
component.
SEL Status SEL full or clearing
events
Op. Log Full Operation log full or
clearing events
Sec. Log Full Security log full or
clearing events
CPU Usage CPU usage
Memory Usage Memory usage
BMC Time Hopping Time hopping
NTP Sync Failed NTP synchronization
failure and recovery
events
TaiShan 200 Server (Model 2280)
User Guide A Appendix
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 177
To Next Page
Loading...
