Huawei TaiShan 200 23280 - Initial Configuration (iBMC V3.01.00.00 or Later)

Figure 5-48 PXE Conguration screen
Step 4 Congure the PXE function.
1. Select the network port such as PXE1 Conguration, and press Enter.
2. In the dialog box that is displayed, select Enable and press Enter.
Step 5 Select a network protocol for PXE boot.
1. Select PXE Boot Capability and press Enter.
2. In the dialog box that is displayed, select a network protocol that needs to be
supported.
– UEFI: IPv4
– UEFI: IPv6
– UEFI: IPv4/IPv6
NO TE
The value of this parameter varies according to the server model or BIOS version.
Step 6 Press F10.
The system displays the "Save conguration changes and exit?" dialog box.
Step 7 Select Yes and press Enter.
The server automatically restarts for the settings to take
eect.
----End
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 87