Huawei TE80 - Setting Wi-Fi Parameters

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
3 Network
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27
Parameter
Description
Setting
Certificate.
Video
request
handling
Specifies how your endpoint handles
video requests from a remote endpoint
during a point-to-point SIP audio call or
multipoint conference.

Accept automatically: Your
endpoint automatically accepts video
requests from the remote endpoint.

Reject automatically: Your endpoint
automatically rejects video requests
from the remote endpoint.

Manual: Your endpoint prompts you
to accept video requests from the
remote endpoint.
The default value is Manual.
Step 2 Select Save.
----End
3.1.5 Setting Wi-Fi Parameters
To use your endpoint to implement video communication over a Wi-Fi network, set the Wi-Fi
parameters.
Setting Wi-Fi Client Parameters
When the Wi-Fi client function is enabled, your endpoint functions as a Wi-Fi client and
access an available Wi-Fi network after connecting to a wireless router.
Step 1 Choose Advanced > Settings > Network > Wi-Fi > Wi-Fi Client. Select Enable for the
Wi-Fi Client parameter.
Your endpoint automatically scans for available wireless routers and lists them in the
Wireless access point list box.
If you need to set a static IP address for your endpoint, go to Step 2. Otherwise, go to Step 4.
Step 2 Select Advanced. On the displayed Advanced Wireless Settings screen, set IP parameters
described in Table 3-6.
Table 3-5 Wi-Fi parameters
Parameter
Description
Setting
Connection type
Specifies the mode in which
the endpoint obtains an IP
address.

Static IP: The network
administrator assigns an
IP address to the
The default value is
Dynamic IP.
Select Dynamic IP unless
special network
requirements are imposed.