Huawei TE80 - Setting the Upgrade Password; Setting the Air Content Sharing Password

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
7 Security
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
Parameter
Description
Setting
security and prevents information
disclosure.
The default user name and
password for logging in to the
endpoint in SSH mode are debug
and Change_Me respectively.
To protect against unauthorized
access, change the password at
your first login.

A maximum of three users is allowed to simultaneously log in to the endpoint in SSH mode.

A maximum of seven users is allowed to simultaneously log in to the endpoint in SSH and Telnet
modes.
Step 2 Select Save.
----End
7.4 Setting the Upgrade Password
You can set the password required to upgrade the endpoint software using the upgrade tool.
Step 1 Choose Advanced > Settings > Secured > Upgrade password. Set the upgrade password
parameters described in Table 7-4.
Table 7-4 Upgrade password
Parameter
Description
Setting
Upgrade
password
Specifies the password required to
upgrade your endpoint software
using the upgrade tool.
Default value: Change_Me
The password contains 6 to 32
characters. In addition, it must
include at least two of the
following: uppercase letter,
lowercase letter, digit, or special
character.
To improve device security, set a
password at your first login.
Step 2 Choose Save.
----End
7.5 Setting the Air Content Sharing Password
When connecting to the endpoint, an air content sharing client must provide the predefined
password.