Huawei TE80 - Page 103

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
7 Security
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
Parameter
Description
Setting
To protect against unauthorized
access, change the password at your
first login.
SSL
encryption
Specifies whether to enable
Security Socket Layer (SSL)
encryption to improve
transmission security.
When SSL encryption is enabled,
the touch panel must use
Hypertext Transfer Protocol
Secure (HHTPS) to connect to
the endpoint.
When the data to be transferred must
be highly secured, it is recommended
that you select SSL encryption.
This parameter is selected by default.
Monitor video
Specifies whether to allow
remote users to log in to the
endpoint web interface to view
local and remote videos and
presentations and take pictures.
For details, see 9.3.8 Monitoring
the Video.
This parameter is not selected by
default.
NOTICE
This function involves privacy protection.
Ensure that its use complies with local
laws and regulations.
Step 2 Select Save.
----End
SSH and Telnet Login
Step 1 Choose Advanced > Settings > Secured > SSH/Telnet. Set the SSH and Telnet login
parameters described in Table 7-3.
Table 7-3 SSH and Telnet login parameters
Parameter
Description
Setting
Telnet Login
Specifies whether remote users can
log in to the endpoint in Telnet
mode for maintenance and
configuration purposes, such as
querying system logs and status
information.
NOTICE
If the computer you use to telnet to
your endpoint runs Linux, specify the
Telnet port on the endpoint by running
telnet endpoint IP address port
number. For example, run telnet
10.11.12.123 23 where 23 is the port
number.
This parameter is selected by
default.
The default user name and
password for telnetting to the
endpoint are debug and
Change_Me respectively.
To protect against unauthorized
access, change the password at
your first login.
SSH
Specifies whether to enable SSH,
which improves transmission
This parameter is selected by
default.