Huawei UPS2000-G-20KRTL - I Transferring the UPS that Has Generated an Alarm to Normal Mode and Clearing the Alarm Tone

I Transferring the UPS That Has Generated
an Alarm to Normal Mode and Clearing the
Alarm Tone
Procedure
Step 1 Press the INFO button to conrm that the alarm is generated for the bypass
power supply.
Step 2 Press the OK button for 5 seconds or enter the control screen to start the inverter.
Step 3 Verify that the alarm is cleared and the alarm tone disappears.
----End
UPS2000-G- (6 kVA-20 kVA)
User Manual
I Transferring the UPS That Has Generated an Alarm
to Normal Mode and Clearing the Alarm Tone
Issue 18 (2021-07-16) Copyright © Huawei Technologies Co., Ltd. 183