Huawei UPS2000-G-20KRTL

To Next Page

To Previous Page

2.3 Appearance

NO TICE

● For UPS2000-G-6 kVA and UPS2000-G-10 kVA, if the UPS input uses two live

wires (208 V/220 V system), all L and N wires change to L1 and L2 wires.

● If the AC input of the UPS2000-G-10 kVA uses two live wires, connect AC

INPUT L1, L2, and L3 that are short-circuited with a short-circuit busbar to live

wire L1, and connect AC INPUT N to live wire L2.

● If the AC input of the UPS2000-G-15 kVA/20 kVA uses two live wires, connect

bypass and mains input bL1, bL2, bL3, mL1, mL2, and mL3 that are short-

circuited with a short-circuit busbar to live wire L1, and connect the input N

and N with a short-circuit busbar to live wire L2.

● In addition, if the AC input and AC output use two live wires, the input and

output ends must connect to two-pole circuit breakers provided by the user.

UPS2000-G- (6 kVA-20 kVA)

User Manual 2 Quick Introduction

Huawei UPS2000-G-20KRTL - Appearance