Huawei UPS2000-G-20KRTL - Optional Components

Figure 2-6 Front and rear views of the UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01
(1) Control panel (2) AC input ports
(mains and bypass)
(3) Battery terminals (4) EPO port
(5) Maintenance
bypass port (MBS)
(6) Parallel ports (7) CAN
communications ports
(MON1 and MON2)
(8) USB port (security
protection mechanism
supported)
(9) Battery
temperature sensor
port
(10) Optional card slot (11) AC output ports
(pL and sL)
NO TE
It is recommended that the length of the cable connected to the MBS port be less than or
equal to 10 m.
2.4 Optional Components
NO TICE
For UPS2000-G-10 kVA/15 kVA/20 kVA, if the AC input and AC output use two live
wires, PDC-0038V4ACIOA, PDC-0091V2ACIOA, and PDC-0038V4ACIOA-V2 cannot
be used.
UPS2000-G- (6 kVA-20 kVA)
User Manual 2 Quick Introduction
Issue 18 (2021-07-16) Copyright © Huawei Technologies Co., Ltd. 18