1.1 Board Registration Troubleshooting
1.1.1 A Board Fails to Be Registered
Common Causes
This fault is commonly caused by one of the following:
l The board is starting.
l The board was reset.
Troubleshooting Flowchart
The troubleshooting roadmap is as follows:
l Check whether the board is starting.
l Check whether the board is in an unregistered state after the board has finished startup.
l Check whether the board was reset. If the board was reset, locate the cause.
Figure 1-1 shows the troubleshooting flowchart.
Huawei AR2200-S Series Enterprise Routers
Troubleshooting 1 Hardware
Issue 01 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
To Next Page
Loading...
