EasyManua.ls Logo

Huawei V200R001C01 - Xdsl Troubleshooting

Huawei V200R001C01
391 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Internet protocol processing : disabled
Link layer protocol is PPP, loopback is detected
LCP closed
The Vendor PN is HFBR-57E0P
The Vendor Name is AVAGO
Port BW: 155M, Transceiver max BW: 155M, Transceiver Mode: MultiMode
WaveLength: 1310nm, Transmission Distance: 2000m
Physical layer is Packet Over SDH
Scramble enabled, clock master, CRC-32, loopback: local
Flag J0 "NetEngine "
Flag J1 "NetEngine "
Flag C2 22(0x16)
SDH alarm:
section layer: none
line layer: none
path layer: none
SDH error:
section layer: B1 22
line layer: B2 94 REI 145
path layer: B3 44 REI 86
Statistics last cleared:never
Last 300 seconds input rate 56 bits/sec, 0 packets/sec
Last 300 seconds output rate 56 bits/sec, 0 packets/sec
Input: 40530 packets, 890400 bytes
Input error: 0 shortpacket, 0 longpacket, 2 CRC, 0 lostpacket
Output: 36512 packets, 946612 bytes
Output error: 0 lostpackets
Output error: 0 overrunpackets, 0 underrunpackets
l If loopback is detected is displayed, it indicates that a loop occurs on the link. You need
to locate the cause of the loop and eliminate the loop.
l If no loop occurs but the fault persists, go to Step 5.
Step 5 Check that the link delay is tolerant.
Use a tester to test the link delay. On a Huawei router, the transmission of a PPP packet times
out in 3 seconds, and the timeout period is configurable. The link delay must be smaller than the
timeout period.
l If the link delay is too long, replace or maintain the relevant device.
l If the link delay is tolerant but the fault persists, go to Step 6.
Step 6 Collect the following information and contact Huawei technical support personnel.
l Results of the preceding troubleshooting procedure
l Configuration files, log files, and alarm files of the devices
----End
Relevant Alarms and Logs
Relevant Alarms
None.
Relevant Logs
None.
5.8 xDSL Troubleshooting
This chapter describes how to locate and troubleshoot common xDSL faults with examples.
Huawei AR2200-S Series Enterprise Routers
Troubleshooting 5 WAN
Issue 01 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122

Table of Contents

Related product manuals