Ver. 1.4 – 6-21
32
Using the IR Remote (Continued) .
16. Direction/Menu Operation
In OSD Menu: traverse OSD Menu
Out of OSD Menu: pan & tilt camera
17. Preset Settings
Use the Number Keys to input a preset number, then press call, store, clear to perform the
corresponding command.
18. Enter
After inputting numbers, press this button to confirm.
IR Remote Shortcuts _
• [F1] > [1] > [ENTER] - Change camera to Device Address 1
• [F1] > [2] > [ENTER] - Change camera to Device Address 2
• [F1] > [3] > [ENTER] - Change camera to Device Address 3
• [F1] > [4] > [ENTER] - Change camera to Device Address 4
• [F1] > [5] > [ENTER] - Start Tracking
• [F1] > [6] > [ENTER] - End Tracking
• [F2] > [0] > [0] > [1]: Set the IP address to DHCP
• [F2] > [0] > [8] > [1]: Set IP address to: 192.168.100.81
• [F2] > [0] > [8] > [2]: Set IP address to: 192.168.100.82
• [F2] > [0] > [8] > [3]: Set IP address to: 192.168.100.83
• [F2] > [0] > [8] > [4]: Set IP address to: 192.168.100.84
• [F2] > [0] > [8] > [5]: Set IP address to: 192.168.100.85
• [F2] > [0] > [8] > [6]: Set IP address to: 192.168.100.86
• [F2] > [0] > [8] > [7]: Set IP address to: 192.168.100.87
• [F2] > [0] > [8] > [8]: Set IP address to: 192.168.100.88
• [F2] > [0] > [8] > [9]: Set IP address to: 192.168.100.89
• [F2] > [0] > [8] > [0]: Set IP address to: 192.168.100.80
To Next Page
Loading...