Hughes weschler instruments BarGraph TriColor Series User Manual

19
DEC
Set Decimal Point
This function is used to set the position of the decimal point on the digital display.
Press
ENTER/SAVE
Press
INCREASE
DECREASE
The display will show the current display decimal point setting. Options for
display decimal settings and the order they appear are shown below.
Pressing the INCREASE or DECREASE pushbutton will cycle through the
decimal options shown below.
0 digits after the decimal point.
1 digit after the decimal point.
2 digits after the decimal point.
0.
.02
.003
.0004
.1
Press
ENTER/SAVE
Press ENTER/SAVE to store the new setting.
MOME
3 digits after the decimal point.
4 digits after the decimal point.
No decimal point.

Hughes weschler instruments BarGraph TriColor Series Specifications

General

Brand	Hughes
Model	weschler instruments BarGraph TriColor Series
Category	Measuring Instruments
Language	English