Humanscale efloat GO - Before Getting Started; Parts Included; Two Column Standard;Extended Range Parts; Hardware Included

6
Parts Included
Two Column (Standard/Extended Range)
Before Getting Started
• If using a power drill, use a low torque setting�
• Do assemble product on a protective surface�
• 2 or more people may be required to maneuver the table�
• After assembly, the table will need to have an initial set up/reset performed before table can be
used�
Leg Assembly
(9) ST5 x 20 wood screws
Power Supply
(2) Feet
4mm Allen Key
Assembly Handle
(8) M6 x 14 machine screws
Control Box
Connecting cable
Left, Right Wing Brackets
(2) ST4 X 16 Wood Screws (10) ST5 X 16 Wood Screws
Hand Switch
(10) Cable Ties
Philips Head Screw Driver
Universal Worksurface
(CONFIGURATION SPECIFIC, PACKAGED
SEPARATELY)
Power Drill with Philips driver bit Measuring Tape
Tools Required
Hardware Included