3. Let go of lever 3 and pull the seat
completely down.
4. Push down on the seat firmly. Try pulling it up
to be sure it is locked into place.
5. Pull up on the
release lever
labeled 1 and then
pull up on the
seatback until the
seatback locks into
the upright position.
Removing the Seat
To remove the seat, do the following:
1. Open the liftgate.
Notice: Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
2. Fold the seatback
forward onto the
seat cushion
by using the lever
labeled 1. The
seat cannot
be removed unless
the seatback is
folded.
20
To Next Page
Loading...
Need help?
General
