Audio Steering Wheel Controls
If your vehicle has this feature, some audio
controls can be adjusted at the steering wheel.
They include the following:
g(OnStar
®
/Mute): Press this button to interact
with the OnStar system. See the OnStar
®
System
on page 144 in this manual for more information.
PROG (Program): Press this button to play the
stations that are programmed on the radio preset
pushbuttons. The radio will go to the first preset
station, play for a few seconds, then go to the next
preset station. Press this button again to stop
scanning. The radio will only scan preset stations
with a strong signal that are in the selected band.
When a cassette tape is playing, press this button
to play the other side of the tape.
When a CD is playing in the CD changer, press this
button to go to the next available CD, if multiple
CDs are loaded.
Q SOURCE R: Press this button to switch
between FM1, FM2, AM, or XM1, or XM2
(if equipped), or a cassette tape or CD. The
cassette or CD must be loaded to play. Available
loaded sources are shown on the display as a
tape or a CD symbol.
QSEEK R: Press the up or the down arrow to
go to the next or to the previous radio station
and stay there. The radio will only seek stations
with a strong signal that are in the selected band.
When a cassette tape or CD is playing, press
the up or the down arrow to fast forward or
reverse.
Q VOLR(Volume): Press the up or the down
arrow to increase or to decrease the volume.
296
To Next Page
Loading...
Need help?
General
