Removing the Spare Tire and
Tools (SUT)
The jack is stored in the rear cargo compartment
on the passenger’s side of the vehicle. The
tools for the jack are stored under the rear
passenger’s seat.
To remove the tools, do the following:
1. Locate the tools by lifting the driver’s side
second row seat up to expose the floor.
See 60/40 Split Bench Seat on page 15 for
more information.
2. Remove the strap from the seat rail. Then
carefully slide the tool bag out from under
the seat rail as shown.
Take care to not pinch the seat cables or
electrical harnesses.
474
To Next Page
Loading...
