Daytime Running Lamps (DRL)
To replace a daytime running lamp bulb, do the
following:
1. Locate the lamp
assembly behind the
front bumper. It is
easiest to come
in from the side of
the vehicle
through the wheel
opening.
2. Turn the bulb socket counterclockwise and
remove it from the lamp housing.
3. Remove the bulb from the bulb socket.
4. Install the new bulb into the bulb socket.
5. Reinstall the bulb socket into the lamp housing
and turn it clockwise until it locks.
Roof Marker Lamps
Corner Roof Marker Lamps
To replace one of these bulbs, do the following:
1. Remove the screw and lift off the lens.
2. Turn the bulb socket counterclockwise to
remove it.
3. Remove the bulb.
4. Install a new bulb into the socket.
5. Reinstall the socket into the lens and turn it
clockwise to lock it into place.
6. Hook the side of the lens with the hook end into
the notch first and then tighten the screw.
443
To Next Page
Loading...
Need help?
General
