Problem Recommended Action
Distorted/Interference
DVD audio sound from
vehicle radio.
• Make sure the FM
Modulator and vehicle
radio are tuned to the
same FM frequency.
• Change FM
frequency on the
vehicle radio and FM
Modulator to an
unused frequency in
the current driving
area. (No local,
strong FM station on
the frequency
selected.)
DVD Messages
The following errors display on the video monitor.
Bad Disc: This message displays if a disc
with an unsupported format is inserted into the
DVD player, or if the disc is unreadable.
Region Error: This message displays if the
region code of the DVD is not compatible with the
region code of the DVD player.
No Disc: This message displays when you try to
play or eject a disc that is not in the player.
X: A white X displays, in the upper left corner of
the video monitor, if the operation that has
been selected is not currently available.
DVD Distortion
You could experience video distortion while
operating cellular phones, scanners, CB radios,
Global Position Systems (GPS)*, two-way
radios, mobile fax, or walkie talkies.
It might be necessary to turn off the DVD player
while operating one of these devices in or near the
vehicle.
*Excludes the OnStar
®
System.
Cleaning the Video Screens
The video display screens are made of a specially
coated glass and can be scratched or damaged
by abrasive products, solvents, or ammonia-based
window cleaners. Occasionally take a soft,
lint-free, cotton cloth that has been slightly
dampened with warm water and wrung out
completely. Dry the screens by wiping with a clean
dry cotton cloth.
293