1.4. Route and attach, but do not tighten,
the top tether according to your child
restraint instructions and the following
instructions:
If your child restraint
has a single tether,
route the tether over
the seatback.
If your child restraint
has a dual tether, route
the tether over the
seatback.
1.5. Return the rear passenger side seatback
to its upright position. You may have to
move the child restraint to a temporary
position to do this. Ensure that the
seatback locks and the safety belt is
routed properly. Then lower the seat
cushion until the seatback and the seat
cushion lock into position.
2. Attach the lower attachments to the lower
anchors. If the child restraint does not have
lower attachments or the desired seating
position does not have lower anchors, secure
the child restraint with the top tether and
the safety belts. Refer to your child restraint
manufacturer instructions and the instructions
in this manual.
2.1. Find the lower anchors for the desired
seating position.
2.2. Attach and tighten the lower
attachments on the child restraint to the
lower anchors.
3. Tighten the top tether.
66
To Next Page
Loading...
Need help?
General
