156
Chart Menu Tab
Depth Colors
(optional-purchase LakeMaster® charts only)
Settings: Off, 1 - 10; Default = Off
Depth Color sets the depth shading in the Chart views to Off or Shaded.
Depth Highlight
(optional-purchase LakeMaster® charts only)
Settings: Off, 1 to 180 feet, 1 to 30 fathoms, 1 to 60 meters (International
Models only); Default = Off
Depth Highlight allows you to highlight a depth setting in the chart views. The depth you set
will be highlighted in green. Use Depth Highlight with Depth Highlight Range.
Depth Highlight Range (+/-)
(optional-purchase LakeMaster® charts only)
Settings: 0 to 60 feet, 0 to 30 fathoms, 0 to 20 meters (International
Models only); Default = 5 feet, 2 meters
Depth Highlight Range adjusts the range on each side of the highlighted depth, when a Depth
Highlight is active in the chart views.
Water Level Offset
(optional-purchase LakeMaster® charts only)
Settings: -30 to +30 feet, -5 to +5 fathoms, -10 to +10 meters
(International Models only); Default = 0
Water Level Offset allows you to change the level of the water being read from the control
head. The displayed numbers on the Contour Lines will adjust from the Water Level Offset
setting, and the water level offset will be highlighted in dark brown.
For example, if the lake is down 5 feet, set the Water Level Offset setting to -5.
For example, if you know a certain fish is holding at 18 - 20 feet, you can set the Depth Highlight
at 19 feet, and the Depth Highlight Range a +/- 1 foot. The view will show a green band from
18 - 20 feet.
To Next Page
Loading...
Need help?
General
