Humminbird MEGA 360 IMAGING - Power Off Procedures; Powering Off the Control Head; Powering Off the Transducer

45 Power O
Power O
1. Power O the Control Head
Press and hold the POWER key.
WARNING! Turning off the control head will NOT power off the MEGA 360 Imaging transducer.
2. Power O the Transducer
Turn off power on the main switch, breaker, or battery switch.
NOTE: Powering off the MEGA 360 Imaging transducer will be determined by the installation and power connection on your boat.
3. Check the MEGA 360 Trolling Motor Bracket
Confirm the Depth Collar Knob is fully tightened (by hand). Check the stability of the trolling motor bracket after initial use and
periodically thereafter to ensure that the installation and lock remain stable. See your installation guide for details.