HumminGuru NOVA - Page 11

8
7“ Water Basin Support
10“ Water Basin Support
3.
Pour in water and check the
water level based on the size of
your record. *The water level guide
is for reference only. Optimal water
level should slightly exceed the outer
ring of the dead wax area, based on
the distance from the record’s edge.
Reminder: If it is a 7” or 10” record,
insert the corresponding water basin
supports into the water basin lter slot
before placing the tool to check the
water level.
CAUTION
• DO NOT ll the water
tank with water to a level
exceeding 400ml.
• DO NOT bend, pull, and
twist the tool when it is
inserted in the lter slot.
Failing to do so may break
or loosen the water
basin lter.
• DO NOT allow children to
play with the maintenance
tool�
• DO NOT bend, twist, or
break the maintenance tool�
• DO NOT discard the tool
and both of the 7” and 10”
water basin supports�
*Refer to page 13-14 for comprehensive
instructions on setup.