19
The draining mode enables the user to remove water
from the water basin. Each draining session lasts for
40 seconds. This mode is helpful when there is excess
water in the basin or when the user wants to change the
water after completing the cleaning cycles. Press button once
and press start/pause button to initiate the draining cycle.
Draining Mode
START/PAUSE Light Indications
Blinking White Light
Standby
Solid White Light
Operating
Blinking Red Light
Pause
Solid Red Light
Error
( Indicating water tank not in place )
Solid Yellow Light
Thermal Protection Triggered
Solid Blue Light
Cycle Complete
• DO NOT move the machine during the draining process� It
may cause water leakage�
• DO NOT remove water basin lter while draining, as this can
lead to potential clogging over time�
CAUTION
To Next Page
