21
Clean the Water Basin Filter and 7” & 10” Water
Basin Supports
The water basin lter is located at the bottom of the
water basin. To clean the lter, insert the maintenance
tool vertically into the water basin lter slot and turn it 45º
clockwise with some force to pull out the lter.
**Note: If it is the 7” or 10” record cleaning setting,
remember to remove the water basin support before
taking out the water basin lter.
Clean the Water Basin
Wipe the water basin using a damp cloth. For effective
cleaning, you can wrap the damp cloth around the
maintenance tool and use it to thoroughly wipe the water
basin. Ensure that the water basin lter has been removed
before cleaning.
45˚
click
1 2 3
water
basin
filter
To Next Page
