Hunter 44277W - Settings; To Change to Celcius

23
The default setting of the thermostat is Fahrenheit
(F
o
).
NOTICE: CHANGING THIS SETTING WILL RESET THE
THERMOSTAT TO FACTORY DEFAULT PROGRAMS.
(If no button is pressed for 5 seconds, the unit will return to
the Normal Display mode.)
To change to Celcius (C
o
):
1. Press and hold the
Up button.
2. Use a paperclip to press the
Reset button.
3. Continue to press the
Up button, but release the
Reset button when the LCD turns on.
To reset the unit to F
o
, press only the R button.
SETTINGS