37
3. Press Up or Down to change the hour. Press
Program to save the hour and adjust the minute
setting.
4. Press
Up or Down to change the minute. Press
Program to save the minute setting and adjust
the temperature.
5. Press
Up or Down to set the temperature. Press
P again to move to the next program
number.
(There are 4 programs per day. If you do not wish to assign
all 4 programs per day set at least 2, keeping in mind that
the total program time must equal 24 hours.)
6. Repeat steps 2-5 for the remaining days.
7. To review your program settings, press
Program
repeatedly to review the customized programs.
(You can make changes at any time when the thermostat is
in Program mode.)
8. Slide the system selector switch to the opposite
position and repeat steps 2-5.
METHODS OF OPERATION, CONT.
To Next Page
Loading...
