Hunter FLOW-SYNC HFS - Page 26

26
Flow Sensor Values
Hunter Flow Sensor K-Factor Oset
HFSFCT100 0.44 0.39
HFSFCT150 1.13 0.00
HFSFCT158 0.92 1.22
HFSFCT200 2.13 0.23
HFSFCT208 1.72 1.70
HFSFCT300 4.61 0.18
HFSFCT308 5.87 1.07
HFSFCT400 8.77 0.48
Flow-Sync Calibration Factors
Hunter controllers allow selection of the correct
pipe size by FCT model number. No further
calibration is needed.
If “Other” is selected, K-factor and Oset
information may be entered directly. Following
are K-factor and Oset values for best results
with each available FCT model.