What to do if Hunter Accessories Rain Sensor Bypass Switch is on but not activating the controller?
If the Rain Sensor Bypass Switch isn't activating the Hunter Accessories Controller and it's set to "Bypass", remove the jumper plate bridging the two SEN terminals on the controller.
General| Brand | Hunter |
|---|---|
| Model | Solar Sync |
| Category | Accessories |
| Language | English |
Mount the sensor for unobstructed sun and rainfall, avoiding sprinkler spray.
Details the Rain-Clik and temperature sensor functions and their operation.
Describes mounting the sensor using wall or gutter brackets.
Details mounting the receiver on the wall or controller cabinet.
Recommends cleaning the sensor dome every 6 months for optimal function.
Explains how to disable rain/freeze sensors using the controller switch.
Details wiring the Solar Sync sensor directly to X-Core controller terminals.
Details wiring the wireless receiver to X-Core controller terminals.
Details wiring the sensor to Pro-C/PCC controller terminals.
Details wiring the receiver to Pro-C/PCC controller terminals.
Details wiring the sensor to ICC2 controller terminals.
Details wiring the receiver to ICC2 controller terminals.
Details wiring the sensor to I-Core controller terminals.
Details wiring the receiver to I-Core controller terminals.
Details wiring the sensor to ACC controller terminals.
Details wiring the receiver to ACC controller terminals.
Details wiring the sensor to ACC2 controller terminals.
Details wiring the receiver to ACC2 controller terminals.
Set station run times for peak summer watering with seasonal adjustment at 100%.
Explains how to adjust zone run times if wetter or drier than desired.
Allow system to run for 3 days to gather data before making adjustments.
How to increase/decrease Water Adjustment scale or change Region.
Lists compatible Hunter controllers: X-Core, Pro-C, PCC, ICC2, I-Core, ACC2.
Details power input, current draw, memory, battery, and wiring specs.
Provides physical dimensions for wired and wireless sensors and receiver.
Compliance information for FCC Class B digital device interference limits.
Compliance information for Industry Canada radio communication standards.
Declarations of conformity with European and Australian standards.
Details compliance with European directives for EMC and low voltage.
To Next Page
