Need help?Do you have a question about the Hunter Rain-Clik and is the answer not in the manual?
General| Type | Rain Sensor |
|---|---|
| Adjustable Rainfall Settings | Yes |
| Warranty | 5 years |
| Compatibility | Compatible with most irrigation controllers |
| Mounting Options | Gutter |
| Wiring | Two-wire connection to controller (Wired) |
| Shut-off | Automatic shut-off when rainfall is detected |
| Adjustability | Adjustable sensitivity |
| Function | Prevents irrigation during or after rainfall |
| Sensitivity Adjustment | Yes |
Details parts of the transmitter including test spindle, vent ring, antenna, mounting arm, and status LED.
Connects receiver to specified Hunter controller sensor terminals and 24 VAC power.
Connects receiver to ACC/ACC2 sensor terminals and 24 VAC power.
Connects receiver to Hydrawise controller sensor terminals and 24 VAC power.
Connects receiver wires to sensor terminals or in-line with valve common wire.
Mounts transmitter upright on any surface exposed to unobstructed rainfall.
Guides on choosing locations for optimal range and avoiding interference.
Explains the function of the two LED lights on the receiver for system status.
How to use the receiver's bypass button to temporarily disable the sensor.
Procedure to pair a transmitter with a receiver for wireless communication.
Steps to diagnose why the irrigation system is not activating.
Steps to diagnose why the system fails to shut off after rain.
Solutions for the Sensor Bypass LED flashing red, indicating communication loss.
To Next Page
