Hunter Rain-Clik User Manual

3
Table of Contents
Table of Contents
5 Features
6 Wireless Rain-Clik Components
6 ...Wireless Rain-Clik Transmitter
7 ...Wireless Rain-Click Receiver
8 Mounting the Receiver
8 ...Wiring the Receiver to a Hunter X-Core®, Pro-C®,
PCC, ICC2, or I-Core®
8 ...Wiring the Receiver to a Hunter ACC or ACC2
9 ...Wiring the Receiver to a Hydrawise
TM
-Enabled
Controller
9 ...Wiring the Receiver to Other Controllers: Normally
Closed Sensor Applications
10 ...Normally Open Sensor Applications
10 ...Controllers with 24 VAC Solenoids and a
Booster Pump
11 ...Standard Mounting
11 ...Gutter Mounting (Optional)
12 Adjustments and Operation
12 ...Hints for Mounting the Transmitter
12 ...Transmitter Operation
12 ...Receiver Operation
13 ...Bypassing the Sensor
13 ...Setting the Transmitter Address at the Receiver
14 ...Battery Life
14 ...To Check the Status of the Battery in the Transmitter
14 ...System Will Not Turn On at All
14 ...System Will Not Shut O Even Aer Heavy Rainfall
14 ...Sensor Bypass LED is Flashing Red
15 Notices
15 ...Sensor FCC ID: M3UWRCE
16 ...Certicate of Conformity to European Directives
17 ...CE and Australia Notice
18 ...Industry Canada Notice
19 Notes

Hunter Rain-Clik Specifications

General

Type	Rain Sensor
Adjustable Rainfall Settings	Yes
Warranty	5 years
Compatibility	Compatible with most irrigation controllers
Mounting Options	Gutter
Wiring	Two-wire connection to controller (Wired)
Shut-off	Automatic shut-off when rainfall is detected
Adjustability	Adjustable sensitivity
Function	Prevents irrigation during or after rainfall
Sensitivity Adjustment	Yes