Bypassing the Sensor
If the Rain Sensor or Freeze Sensor is preventing system
operation, SENSOR OFF will be displayed on the controller’s
display. To disable the rain and freeze sensor, move
the RAIN SENSOR switch on the controller to BYPASS.
This allows you to operate your system during rain and
freeze conditions. The Solar Sync will continue to make
adjustments to your controller’s watering schedule. The
controller’s Rain Sensor switch should be in the ACTIVE
position for the Rain Sensor and Freeze Sensor to interrupt
watering during rainy and/or freezing conditions.
Maintaining the Sensor
The Solar Sync sensor is designed for outdoor use, but
must be kept clean to function correctly. Wiping the dome
covering the solar radiation sensor every 6 months is
recommended. Do not use harsh chemicals or abrasives
on the dome.
To Next Page
Loading...
