EN
PROGRAMMING CONTINUED
Sensor Operation
The NODE is compatible with Hunter Clik-type rain sensors, including
Mini-Clik
®
, Freeze-Clik, and Wired Rain-Click
®
, as well as many other
interrupt-type devices/sensors that do not require power. Simply
connect the sensor to the NODE controller by cutting the yellow wire
loop and connecting to the sensor wires.
NOTE: NODE is not compatible with Hunter
Wireless Rain-Clik
®
or other weather devices that
require 24 VAC power.
When the sensor is activated, it will suspend irrigation and the icon
will show on the display.
11
To Next Page
Loading...
