EN
ADVANCED PROGRAMMING FEATURES
All advanced programming functions are initiated from the idle mode,
which shows the time, day of the week, and battery-life indicator on
the display. If something is ashing on the display then the controller is
in one of the programming modes. Aer a short period of inactivity the
controller will return to idle mode.
Sensor Bypass
1. From the idle mode, press and hold the button until the icon
is displayed.
2. The display will show the umbrella icon ashing and ON.
3. Press the button to bypass the sensor. The display will show
and OFF to indicate the weather sensor is bypassed.
The
icon will show on the display during normal operation,
indicating the controller is in bypass mode.
4. To reactivate the weather sensor, press and hold the button
until the
icon is displayed. Press the button to return to
normal sensor mode.
Easy Retrieve Memory
This function allows the user to save a preferred program to permanent
memory in the controller, which can be restored at any time. This is a
great way to override changes made, and revert back to the original
programming schedule.
To save a program:
1. Make sure that the controller is programmed with the preferred
programming schedule.
2. From idle mode, press and hold the
and button for ve
seconds to save the current program.
3. The screen will show three dashed lines moving from le to right
to indicate the current program is being saved to permanent
memory. The display will ash DONE when the process is
complete.
To retrieve a saved program:
1. From idle mode, press and hold the
and button for ve
seconds.
2. The screen will show three dashed lines moving from right to
le to indicate the preferred program is being retrieved from
memory.
The controller now has the preferred program as the current program.
The display will ash DONE when the process is complete.
12
To Next Page
Loading...
Need help?
General
