HunterDouglas Paramount Headrail Systems User Manual

INSTALLATION
5
■ Repeat the previous 4 steps for the other valance return.
IMPORTANT: Vinyl inserts should be cut fl ush with the ends of the valance and valance
returns. Secure vinyl in place with the corner clip and valance return clips.
Proceed to “Mount the Installation Brackets — Inside Mount” on page 7 or “Mount the
Installation Brackets — Outside Mount” on page 9 based on the mounting option ordered.
Single-Tiered Open Corner (Fabric Only)
■ Cut a fabric insert long enough to wrap
around the corner and over the entire
return plus at least 1" excess at
each end.
■ Attach the corner clip and valance
returns.
■ Insert the fabric into the valance, wrap
it through the corner clip and into the
valance return.
IMPORTANT: Leave extra fabric at the other
end of the fabric insert to be able to wrap around
the other valance return.
■ Wrap excess fabric around the end of the
valance return and secure it with a valance
return clip.
■ Repeat steps 3–4 for the other valance return.
Proceed to “Mount the Installation Brackets — Inside Mount” on page 7 or “Mount the
Installation Brackets — Outside Mount” on page 9 based on the mounting option ordere d.
Single-Tiered Round Corner
■ Install the round valance corners onto each end of the
valance.
■ Install the valance returns onto each end of the round
valance corners.
Corner
Valance
Return
Valance
Fabric
Insert
Valance Return
Clip
Round Valance
Corner
Valance
Return
Valance
Fabric
Insert

HunterDouglas Paramount Headrail Systems Specifications

General

Brand	HunterDouglas
Model	Paramount Headrail Systems
Category	Window Blinds
Language	English