HunterDouglas PowerView M25T User Manual

5. fabric open position
When the end limits of a Twist® Roller Blind have been programmed correctly, setting the fabric open position allows the
Twist® Roller Blind to tilt open and close at the bottom position.
4.2.10 The bottom limit is set!
Note
To re-position the bottom limit of the blind, repeat step
4.2. Close limit (bottom)

IMPORTANT
It is important to correctly set the end limits rst! When a top or bottom limit is repositioned, the fabric open position has
to
cleared
and repositioned accordingly!

MANUAL
Page 18 of 30 version: 1.2

HunterDouglas PowerView M25T Specifications

General

Brand	HunterDouglas
Model	PowerView M25T
Category	Accessories
Language	English