1.3. Network reset
This procedure will erase all network data stored in the motor, including Network ID and Group assignments. It will not
clear the end limits. Completing a Network reset will prevent a PowerView® remote or App from operating the window
covering until it is reprogrammed.
1.2.4 Press and hold the manual control button until the
motor jogs 1x.
The motor LED ashes red-orange after the motor jogs
1x.
1.2.5 Release the manual control button .
The end limits have been cleared.
1.3.1 Press and hold the manual control button on the
motor for 12 seconds .
The blind will jog 1x at 6 seconds and a second time at
12 seconds.
MANUAL
Page 5 of 30 version: 1.2
To Next Page
Loading...
Need help?
General
