HunterDouglas PowerView M25T User Manual

3.2. Check and conrm
3.1.1 Press and hold the manual control button .
3.1.2
Press the  open button.
The blind will jog 1x.
Make sure  group1 on the remote is selected.
3.1.3 Release the manual control button .
The motor LED turns red to acknowledge the motor is
in program mode.
IMPORTANT
Watch out to perform steps 3.2.1 and 3.2.2 immediately after each other to avoid mechanical damage!
Carefully read them rst before executing!

MANUAL
Page 9 of 30 version: 1.2

HunterDouglas PowerView M25T Specifications

General

Brand	HunterDouglas
Model	PowerView M25T
Category	Accessories
Language	English