HunterDouglas PowerView Guide

Power
V
Page 2 of 8
Battery Placement:
1. Remove Cover.
Press notch to move cover slightly
clockwise to release and remove cover.
3. Replace Cover.
Position cover over slots. Press notch to
move cover slightly counterclockwise to
lock into position.
V
iew™ Remote Control Guide
Rev 1.8
Press notch to move cover slightly
clockwise to release and remove cover.
2. Place Batteries.
Use two CR 2032 3V batteries.
battery into
each compartment
place to fully seat.
Position cover over slots. Press notch to
move cover slightly counterclockwise to
4. Battery Removal
To remove batteries use a small screwdriver or
fingernail to lift battery
and remove from slot.
01292015
Use two CR 2032 3V batteries.
Slide one
each compartment
and press into
To remove batteries use a small screwdriver or

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model