HunterDouglas PowerView Quick Start Guide

Powerview® Quick Start Guide Gen 1
This guide will help getting you started with your Powerview® purchase.
Step 1. Install your shades
Make sure you have properly installed your shades and that they are connected to a power source (battery ack or power
supply).
Step 2. Your Powerview® components
Packed with your purchased product you will nd one or more remotes, repeaters and a Hub (which is optional and only
required when you want to control your shades using a tablet or smartphone). Remotes come in different shapes and
colours. Please locate them all before you start.
Step 3. Pairing remotes
By pairing PowerView® remotes you make all your remotes part of the same PowerView® Network. This is important for
seamless installation of the PowerView® system.
Pebble
Wall Surface
Repeater
Hub (optional), required
for controlling your
shades with a tablet or
smartphone.
Note
If you only have one remote, please proceed to
step 4
.

MANUAL
Page 1 of 14 version: 1.0

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model