HunterDouglas PowerView Quick Start Guide

Step 5. Install repeaters
Installation of a repeater is necessary when your shade is not responding to a command from your remote control.
Preferably put the repeater halfway between the unresponsive shade and the remote control location.
4.5 Release the Shade button .
4.6 If your remote is still ashing Press stop for 6
seconds.
Keep pressing until the ashing stops.
This instruction will make use of the  stop button on your
remote
and the Repeater button on the repeater.
5.1 Place the repater in the USB charger and plug it in an
outlet
The repeater light illuminates green.
MANUAL
Page 5 of 14 version: 1.0

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model