HunterDouglas PowerView Quick Start Guide

Move a shade to a favorite position
1. Move your shade to the desired favorite position
(Use your open, close and stop buttons to move the shade.)
2.
Press  stop for 6 seconds.
(Keep pressing until the remote lights start blinking.)
3. Press and hold the shade button .
4.
Press the  favorite button
(You will see the shade move up and down briey.)
5. Release the shade button .
6. If your remote is still ashing Press stop for 6 seconds.
(Keep pressing until the ashing stops.)
This instruction will make use of the following buttons
on the Remote:
1. Move shades assigned to group 1 to their favorite position.
1. Press group 1
(Group 1 will light up.)
MANUAL
Page 10 of 14 version: 1.0

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model