HunterDouglas PowerView Quick Start Guide

Install a Scene Controller
A Scene Controller works in combination with the Powerview® App. It can activate scenes which are created in the App.
4.
Press the  close button
(You will see the shade move up and down shortly.)
5. Release the shade button .
6. If your remote is still ashing Press stop for 6 seconds.
(Keep pressing until the ashing stops.)
1. Start the App and open the side menu.
2. Select Scene Controllers and follow the App
instructions.
MANUAL
Page 12 of 14 version: 1.0

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model