HunterDouglas PowerView Quick Start Guide

Step 6. Connect and setup the Hub.
If you have not purchased a Hub please proceed to Additional actions to proceed with your installation.
5.2
Press  stop for 6 seconds.
(Keep pressing until the remote lights start blinking.)
5.3 Hold the remote within 20cm. from the repeater.
5.4
Press  stop .
(The repeater light will turn off. The repeater is
now part of your personal Powerview® Network.)
6.1 Connect the Hub to your home network router
6.2 Connect the Hub to your power outlet
MANUAL
Page 6 of 14 version: 1.0

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model