UltraScan VIS Supplemental Manual for EasyMatch QC ver2.0
54
Cell Holder Base Assembly (D02-1016-956)
This Cell Holder Base Assembly with one or more clip-on holders (ordered separately) centers macro, semi-
micro and ultra-micro, as well as other precision analytical cell holders in the transmission compartment of
HunterLab sphere instruments. This assembly ensures repeatable transmission color measurements of very
small volumes of clear liquids. Select one or more of the available precision cell holders by matching cell
holder specifications with the desired glass or plastic analytical cells.
Analytical cells are purchased separately by the customer. (Works with Precision Cell Holders: D02-1016-
912, D02-1016-913, D02-1017-048, D02-1017-050, D02-1017-051).
Figure 72. Cell Holder Base Assembly
Installation
1. There are two rows of holes in the transmission compartment Precision Cell Holder uses the
row closest to the sphere.
2. There is either an ‘S’ mark or a ‘Δ’ mark on one of the vertical walls. Orient so that the mark
is closest to the sphere.
Figure 73. Orient the Holder as Shown.
To Next Page
Loading...
