To Next Page
S
snyderamandaAug 25, 2025
Why does my Husqvarna Lawn and Garden Equipment go outside working area?
- BBetty OrrAug 25, 2025
If your Husqvarna Lawn and Garden Equipment is operating outside the designated working area, several factors could be the cause. Ensure that the boundary wire connections to the charging station are correctly connected. Check that the boundary wire is laid in accordance with the installation instructions. If the working area has too much of a slope, this can cause issues. Also, verify the boundary wire isn't laid in the wrong direction around an island. Disturbances from metal objects or buried cables close by can also cause this. Try moving the boundary wire. If the robotic lawnmower is struggling to distinguish the signal from another installation nearby, place it in the charging station and generate a new loop signal via Security -> New loop signal.
General
