Husqvarna 445 - Approved Bar and Chain Combinations; Saw Chain Filing and File Gauges Guide

40 – English
ele n the a
1. Assemble the fuel pump and suction hose on
the carburettor.
2. Assemble the fuel hose. (F)
3. Position the carburettor.
4. Fit the return hose (G) on the fuel pump.
5. Fit the throttle cable. (E)
(see gure 40)
6. Assemble the lter holder in the rubber moun-
tings. (B)
. Snap the purge into the lter holder.
8. Secure the screws. (A)
(see gure 41)
9. Assemble the air lter and cylinder cover.
Repair instructions
Fig 41
Fig 40